The Grip Lock System has been designed to be a highly visible theft deterrent which prevents the twist grip on your Motorcycle, ATV or other recreational vehicles from operating.

Immobilise the twist grip and apply the brake.
Once fitted, the Grip Lock will also apply pressure to your brake lever as well ensuring that your motorcycle is held safe when parking on an incline (if adjusted to do so).

Never forget it's on.
Unlike disk locks, the placement of the Grip Lock prevents the rider from forgetting it's in place thus eliminating the risk of damage to the motorcycle.

Easy to Use.
The Grip Lock has been designed to be easy to use and does not require the key to lock the device. Simply place it over the twist grip and brake lever, close the two halves together and push the lock in to secure your motorcycle.

Casing: The casing of the Grip Lock is high pressure injection moulded with 30% glass filled nylon designed to resist high impact levels.

The casing also contains 3 3.1mm hardened steel rods impregnated into the moulding. These rods are much harder than a hacksaw blade preventing would be thieves from simply sawing the Grip Lock off.

Hinge Pin: 5mmstainless steel machined to house a locating pin. Locating fixing pins for hinge and lock barrel are stainless steel.Lock barrel mounting platform protected by raised ring border to resist forcible removal.